Sur-Ron Speedometer Relocation Bracket is meant to move the speedometer location from the left handlebar to be centered above the steer tube. It is 3D printed in black PETG and includes two M4x10mm cap head socket bolts which require a 3mm allen/hex wrench to install. The inner diameter of the bracket is 31.8mm, which is the stock bar size. You can also select the 35mm size for aftermarket bars.

INSTALLATION:

Remove the two screws that hold the speedometer to the switch bracket, then slide the speedometer UP off of the bracket. Use the two screws you removed to mount the speedometer to the 3D printed bracket. Slip the partial ring of the 3D printed bracket around the handle bar, then bolt it to the speedometer bracket with the included M4x10mm bolts with a 3mm allen wrench. DO NOT OVERTIGHTEN! Just make it snug so the ring doesn’t slip. The bracket will crack if you overtighten the bolts.

USPS First Class Shipping is FREE in the continental US for 1… 3 or more is $3.

The 31.8mm bracket was designed by Sibb and can be downloaded here on Thingiverse if you’d like to print it yourself. Shared under the Creative Commons Attribution licence v4.